uchcom update

[Andriy Gapon]

Yesterday I committed some changes to uchcom (so far, only in CURRENT).
Commits are r333997 - r334002.

If you have a CH340/341 based USB<->RS232 adapter and it works for you, could
you please test that it still does?
If you tried your adapter in the past and it did not work, there is a chance it
might start working now. Could you please test that as well?

Thanks!

[Ian FREISLICH]

Post by Andriy Gapon
Yesterday I committed some changes to uchcom (so far, only in CURRENT).
Commits are r333997 - r334002.
If you have a CH340/341 based USB<->RS232 adapter and it works for you, could
you please test that it still does?
If you tried your adapter in the past and it did not work, there is a chance it
might start working now. Could you please test that as well?

ugen5.4: <vendor 0x1a86 USB2.0-Serial> at usbus5, cfg=0 md=HOST spd=FULL
(12Mbps) pwr=ON (96mA)
ugen5.4.0: uchcom0: <vendor 0x1a86 USB2.0-Serial, rev 1.10/2.54, addr 3>

It's not made it any worse.  I'm not using this adapter by choice - it's
a USB to Maxim (Dallas) one-wire bus adapter.  The manual used to state
that these are possibly the worst chips ever.  Is that still the
prevailing opinion?

Ian

--